Do it yourself
Frequently asked questions about cars and motorcycles

Where to Find the Fuses of the Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuse box

See other generations:
Video tutorial

The fuse box of the Volkswagen Passat is located in the engine bay between the battery and the wing support on the driver's side. To access the fuses, unclip the cover from the upper tabs, remove it, and find the fuses.

Inside the cabin, the fuse box is located at the door panel on the driver's side. To access the fuses, insert a small flat screwdriver into the designated slot, lever it out, and remove the cover from the end of the dashboard.

To replace a fuse, identify it based on the component to be replaced, grasp it with small pliers, pull it out, and check if the bridge inside is broken; if so, the fuse needs replacing. If the bridge is intact, the fuse is functioning.

If the fuse needs replacing, substitute it with one of the same amperage.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2010-2014 / B7) In the Volkswagen Passat, all fuses are located within dedicated fuse boxes installed in the vehicle. In this model, you can find two fuse boxes. The…
Volkswagen Passat (2005-2010 / B6, 3C) Today we will see the information related to the positioning and the layout of the external fuses of the Volkswagen Passat. First of all, we open the…
Volkswagen Passat (2005-2010 / B6, 3C) All the fuse boxes in the Volkswagen Passat contain the fuses that control the operation of the devices in the car: in this type of vehicle, you can …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Adjust the Rear Seats of the BMW X1

In this video, see how the BMW X1's cargo area can be used to transport large loads. To expand this area, the rear seat can be folded down with a 40/20/40 split, each section can be folded separately or all together. The seats can be adjusted independently to provide more space for passengers or cargo: to do this, pull the handle located at the bottom and push or pull as needed. To position the backrest in the desired position, there is a cordura handle on the left side. Inside the trunk, there are buttons that automatically fold the backrests of the rear seats forward, but only after ensuring they are clear. They can be returned to an upright position manually using the cordura handle.

Watch the video!


by ScegliAuto

More videos