Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light Bulb on the VW Sharan

Model: Volkswagen Sharan 7M, MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: License plate light

See other generations:
Video tutorial

The following video tutorial will explain how to replace the number plate bulb on the Volkswagen Sharan model 7m. To perform this operation, unscrew the two screws on the small light unit and then pull it out of its housing. Immediately after, unclip the connector and remove the small bulb to insert the new one. Reconnect the connector to the small light unit and insert it back into its housing, finishing by screwing in the screws.

Proceed in the same manner with the right light bulb. Finally, to test the lights, turn on the instrument panel and the position lights.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Volkswagen Sharan?
How to Replace the Rear Light Bulb on a Volkswagen Sharan?
Volkswagen Sharan (1995-2010 / 7M, MK 1) To replace the rear light bulb on a Volkswagen Sharan, open the bonnet to access the panel on the side of the boot corresponding to the bulb to be re…
How to Remove Bulbs from the Sharan Rear Light
How to Remove Bulbs from the Sharan Rear Light
Volkswagen Sharan (1995-2010 / 7M, MK 1) Are the bulbs in your rear light blown? Let’s look at removing the bulbs from the Sharan light. Lift the tailgate of the boot and use a screwdriver t…
How to Replace the Front Headlight Bulb in the Volkswagen Sharan 2
How to Replace the Front Headlight Bulb in the Volkswagen Sharan 2
Volkswagen Sharan (2010-2023 / 7N, MK 2) If one of the front headlight bulbs in your Volkswagen Sharan second generation (2010-2023) has suddenly stopped working and you want to learn how to…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos