Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate Lane Assist on the Volkswagen Golf

Model: Volkswagen Golf Golf 8, MK 8, Golf Viii - Years 2019-2026
Part: Checks and maintenance

In these short and simple steps, we will see how to activate and deactivate the Lane Assist on the Volkswagen Golf. First of all, get into the car and start the engine; then select the lane assist option using the left lever on the steering wheel, moving it upwards as shown in the video. Next, use the "ok" button on the right side of the steering wheel to activate or deactivate the Lane Assist, confirming or not the prompt that appears on the display; this function can be activated or deactivated at any time.

Posted on 30 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) To deactivate Lane Assist on the Volkswagen Golf, turn on the instrument cluster by rotating the key in the ignition switch. Once this is on, press t…
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) To deactivate the Lane Assist of the Volkswagen Golf, you will need to turn on the instrument panel by turning the key inside the ignition switch: on…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this video we see in detail how the Lane Assist system works, that is, lane keeping. It is an option that we can choose to keep activated or not o…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos