Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Traction Control on a Volvo S40?

Model: Volvo S40 MK 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

To disable the traction control on a Volvo S40, insert the ignition key into the ignition switch to turn on the instrument panel. Once the panel is on, repeatedly press the RESET button located on the lever to the left of the steering wheel.

This will scroll through the menu that appears on the instrument panel until you find the option for traction control: pressing and holding the RESET button for a few seconds will display a message confirming the deactivation of the car's traction control.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

Replacing the Battery of the Volvo S40
Replacing the Battery of the Volvo S40
Volvo S40 (2004-2012 / MK 2) Replacing the battery of the Volvo S40? Remove the battery if it is faulty and non-rechargeable. Open the car's door and pull up the engine compartme…
How to Perform the Emergency Release of the Boot on the Volvo S40 Mk2
How to Perform the Emergency Release of the Boot on the Volvo S40 Mk2
Volvo S40 (2004-2012 / MK 2) This guide shows how to perform the emergency release of the boot on the Volvo S40 Mk2. The first step is to remove the retaining clips from the tail…
Where is the OBD port of the Volvo S40 located?
Where is the OBD port of the Volvo S40 located?
Volvo S40 (1995-2004 / MK 1) To gain free access to the OBD port of your first-generation Volvo S40, simply follow the procedure described in the following guide. First, you need…

Other guides you may be interested in

    Frequently Asked Questions

    • S40 1995-2004 - Why does the Volvo S40 not start? Read answer

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos