Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo C40

Model: Volvo C40 MK 1 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

Video tutorial

Today, you will learn how to reset the service light on the 2021 Volvo C40. To perform the reset, you need to: - close all doors; - press the Menu button while simultaneously turning on the instrument cluster; - press the menu button located on the left side of the steering wheel; - wait for the reset of the light to load; - turn off and turn on the instrument cluster again; if the light still comes on, take the vehicle to a workshop for a diagnostic check to understand and resolve the fault, likely related to the control unit.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

In the Volvo C40, how do you reset the service light?
In the Volvo C40, how do you reset the service light?
Volvo C40 (2021-2026 / MK 1) The procedure for resetting the Service light in the Volvo C40, the car presented in the video at our disposal, is as follows: turn on the instrument…
Location and Diagram of the Fuse Boxes of the Volvo C40
Location and Diagram of the Fuse Boxes of the Volvo C40
Volvo C40 (2021-2026 / MK 1) Let's look at the location of the fuse boxes in the Volvo C40: In the engine compartment, there are two boxes; the first protects the main engine sys…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos