Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the gear knob of a Volvo V70

Model: Volvo V70 MK 3 - Years 2007-2016
Part: Shift knob

In this video, we can see how to remove the gear knob of a Volvo V70: we turn the lower support clockwise, and gently place it on the metal base of the automatic transmission. Now we need to remove the plastic clip that holds the knob in place; to do this, we will use two pointed screwdrivers to lift it from its housing. However, we must do this very carefully to avoid scratching the metal. This will allow us to easily lift the knob. The replacement knob for this automatic model is only available as a genuine Volvo spare part with the code 43228, and unfortunately, we are unable to provide a price.

Posted on 20 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the front headlight of the Volvo V70?
How do you remove the front headlight of the Volvo V70?
Volvo V70 (2000-2007 / MK 2) In order to remove the front headlight of the Volvo V70, you will first need to remove the front bumper of the car and then the corresponding fender:…
How to remove the starter motor of a Volvo V70
How to remove the starter motor of a Volvo V70
Volvo V70 (2000-2007 / MK 2) Let's see how to remove the starter motor of a Volvo V70. We lift the bonnet and put it in safety; we remove the aeration kit, disconnect the termina…
How to reset the "Service" light on a Volvo V70?
How to reset the "Service" light on a Volvo V70?
Volvo V70 (2000-2007 / MK 2) Good morning! Today we will focus on resetting the "Service" light on our Volvo V70. Before we begin, it is essential to have performed the recommend…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos