Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate and deactivate the alarm of the Volvo XC90

Model: Volvo Xc90 MK 2 - Years 2015-2026

Below we will see the information that will allow us to activate and deactivate the anti-theft system of the Volvo XC90, in simple and quick steps. If the car is equipped with it, it will be possible to activate the anti-theft system from the dedicated button on the remote control, making sure to have correctly closed all the doors; in the video the operation of the anti-theft system is illustrated by activating it from the inside and then opening the door (simulating a possible theft). To deactivate the anti-theft system, simply press the door opening button, allowing you to open the doors.

Posted on 25 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the Alarm on a Volvo XC90?
How to Disable the Alarm on a Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) This video tutorial explains how to disable the alarm on a Volvo XC90, not under normal operation of the key/remote, but when the battery is dead and…
How do you reset the alarm on the Volvo XC90?
How do you reset the alarm on the Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) When the alarm of the Volvo XC90 stops working or is experiencing abnormal functioning, it is likely that the module managing its operation is damage…
How to Disable the Stability Control on a Volvo XC90
How to Disable the Stability Control on a Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Today, we will illustrate how to disable the stability control on a Volvo XC90; it is advised not to disable this function while driving, as it may c…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos