Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance reminder on the Volvo XC90

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Service warning light

In today's article, we will show you how to reset the reminder message of the Volvo XC90 service. We recommend performing this procedure only if the warning light remains on after servicing. To reset this light, you must press and hold the reset button on the dashboard, keeping it pressed start the dashboard by turning the key to position 2, after starting the dashboard wait with the button pressed until the warning light, or the triangle with an exclamation point in the center, begins to flash, at this point release the button and the procedure will be complete.

Posted on 30 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Side Mirror Bulb for the Volvo XC90?
How to Replace the Side Mirror Bulb for the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To replace the side mirror bulb for the Volvo XC90, use a tool to pry off the corresponding mirror cap: once the cap is removed, disconnect the light…
How to reset the tire pressure on Volvo XC90
How to reset the tire pressure on Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Today we will see how to reset the tire pressure on a Volvo XC90, second generation model produced from 2015 onwards. Let's start the procedure by tu…
How to Adjust the Parking Brake on a Volvo XC90?
How to Adjust the Parking Brake on a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To adjust the parking brake on a Volvo XC90, remove the protective panel on the left side of the center tunnel. Access this panel from the driver's f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos