Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Volvo XC90?

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

To reset the "Service" light on a Volvo XC90, turn on the instrument panel without starting the engine, keeping the brake pedal released. Press and hold the button located under the instrument panel, which is usually the button to reset the trip meter.

While holding down the button, lightly press the start button to bring the panel into full ignition mode. Continue to hold down the button until the "Service" light starts flashing and then turns off. Once the light has been reset, release the button.

This process allows you to reset the service reminder and update the maintenance intervention data. Make sure to complete this operation only after performing the necessary checks and maintenance operations, to ensure that the vehicle system is up to date.


Posted on 18 July 2025 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Volvo XC90?
How to reset the "Service" light on a Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) To reset the "Service" light on a Volvo XC90, turn on the instrument panel without starting the engine by pressing the "Start" button. Use the button…
How to Reset the Service Light on a Volvo XC90
How to Reset the Service Light on a Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) To completely clear the Service light displayed on the instrument cluster of the Volvo XC90, press and hold the button located on the left side of th…
How to Reset the Service Light on a Volvo XC90?
How to Reset the Service Light on a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) From the display of the Volvo XC90, you can completely clear the Service light by pressing and holding the button located on the left side of the dis…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos