Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the auxiliary battery of a Volvo XC60?

Model: Volvo Xc60 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

See other generations:
Video tutorial

To replace the auxiliary battery of a Volvo XC60, start by accessing the rear luggage compartment, where it is housed. Lift the trunk floor to reach the compartment below and locate the cover that protects the battery.

Remove it carefully, being careful not to damage any fastenings. Once exposed, loosen the cable clamps, always starting from the negative terminal to avoid short circuits, and then disconnect the positive one. Remove the discharged battery from its housing, making sure to handle it with care to prevent any acid leaks.

Insert the new battery in the correct position, connecting the positive terminal first and then the negative one, tightening the clamps securely. Reposition the cover and close the luggage compartment.

Finally, turn on the ignition to verify that the system recognizes the new battery and that there are no further warnings on the dashboard.


Posted on 20 June 2025 by ScegliAuto


Related tutorials

How to Replace the Auxiliary Battery in a Volvo XC60?
How to Replace the Auxiliary Battery in a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To replace the auxiliary battery in a Volvo XC60, open the hood to access the components inside the engine compartment. Here, you will find the batte…
Battery replacement for the Volvo XC60
Battery replacement for the Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) These brief and simple steps will show us how to disassemble and replace the battery of the Volvo XC60. First, let's open the rear hatch of the trunk…
How to Replace the Key Fob Battery in a Volvo XC60?
How to Replace the Key Fob Battery in a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) In this tutorial, you will see how to replace the key fob battery in a Volvo XC60, a very simple and quick operation. For this, you will need a small…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos