Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to lower and remove the rear headrests of the Volvo XC90

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Checks and maintenance

The information provided in this guide will show us how to lower and remove the rear headrests of the Volvo XC90. First, we open the rear tailgate of the trunk and start pulling the lever located on the side of the backrest to lower the headrest; then we remove the side cover and unscrew the fastening screws to remove the headrest from the rods, as shown in the video. At this point, we proceed with the repair or replacement of the rear headrest, also removing the other headrests in the same way; finally, we reassemble everything!

Posted on 6 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to lower the headrests of the rear seats of the Volvo XC90
How to lower the headrests of the rear seats of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Today we discover the instructions that will allow us to lower the rear headrests of the Volvo XC90 in a simple and quick way. First, we get on board…
How to Lower the Rear Seats of a Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) In this simple video tutorial, you will see how to lower the backrest of the rear seats in a Volvo XC90. Lowering the backrests is really straightfor…
How to Replace the Remote Battery for the Volvo XC90?
How to Replace the Remote Battery for the Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) To replace the battery in the Volvo XC90 remote, lower the side lever to remove the cover on the back of the device. Next, pry off the front cover an…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos