Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform the transmission adaptation of the Volvo S60

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Checks and maintenance

In this guide, we will see the instructions that will allow us to reset and adapt the transmission of the Volvo S60. In order to carry out the adaptation of the car's transmission, it will be necessary to use a specific software capable of communicating with the gearbox control unit; it will in fact restore and subsequently recalibrate the gearbox parameters, thus carrying out the adaptation, as shown in the video. Once the operation is completed, we will test the gearbox conditions on the road, verifying the effective resolution of the problem.

Posted on 8 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Light in a Volvo S60?
How to Reset the Tire Light in a Volvo S60?
Volvo S60 (2010-2018 / MK 2) In this tutorial, see how to reset the tire light in a Volvo S60, a very simple and quick operation to perform only after restoring the correct press…
How to Remove the Center Console in a Volvo S60?
How to Remove the Center Console in a Volvo S60?
Volvo S60 (2010-2018 / MK 2) Removing the center console in a Volvo S60 is a simple and quick task. First, ensure the key is not in the ignition. Next, remove the lower left pane…
How to Replace the Gear Position Sensor on a Volvo S60
How to Replace the Gear Position Sensor on a Volvo S60
Volvo S60 (2000-2009 / MK 1) Discover the main steps to remove and replace the gear position sensor or transmission sensor on the Volvo S60 in this guide. First, open the hood an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos