Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Volvo XC90?

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Service warning light

It is possible to eliminate the Service light of the Volvo XC90 by keeping the button on the left side of the steering wheel pressed while the instrument panel is deactivated. By continuing to hold down the button, you can insert the ignition key and then start the engine using the appropriate button; this will cause the maintenance light to flash, allowing you to release the button when the light becomes steady. At the end of the operation, you can turn off the instrument panel to confirm the reset of the specific light.

Posted on 17 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Service reset on a Volvo XC90
Service reset on a Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Today we will see how to reset the service light on a second generation Volvo XC90, produced from 2015 onwards. So let's start the operation by inser…
How do you reset the Service warning light on the Volvo XC90?
How do you reset the Service warning light on the Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) On the Volvo XC90, the reset operation of the Service light is carried out by pressing and holding the - button located on the left side of the steer…
How to Replace the Side Mirror Bulb for the Volvo XC90?
How to Replace the Side Mirror Bulb for the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To replace the side mirror bulb for the Volvo XC90, use a tool to pry off the corresponding mirror cap: once the cap is removed, disconnect the light…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos