Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volvo XC90?

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Service warning light

To begin resetting the Service light on the Volvo XC90, press and hold the button located on the left side of the steering wheel while the instrument cluster is off. Continue holding the button, insert the ignition key, and then start the engine with the appropriate button; this will cause the maintenance light to start flashing, and you can release the button when the light becomes steady. At the end of the procedure, you can turn off the instrument cluster, confirming the reset of the corresponding light.

Posted on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Volvo XC90
How to reset the service light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) After performing the maintenance service, it is necessary to reset the service light for the engine oil change; let's see the reset procedure on the …
How to Reset the Service Light on the Volvo XC90
How to Reset the Service Light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Let's go over the steps to reset the service light for the routine oil change maintenance on the Volvo XC90. First, get inside the vehicle and turn o…
How to reset the service light on the Volvo XC90
How to reset the service light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) To complete the manual reset procedure of the service light on your second generation Volvo XC90, simply follow the steps outlined in the following g…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos