Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the gear knob of the Volvo S60

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Shift knob

If you are planning to remove the gear knob of your second-generation Volvo S60 by yourself, but you don't know how to do it, then all you have to do is follow the steps described in our new guide. First of all, enter the interior of the car and make sure the car is completely turned off, then locate the small washer located under the gear lever and rotate it clockwise until it comes off. Once you have done this, grab the gear knob and pull it upwards with force until it comes off completely. At this point, the procedure is successfully completed.

Posted on 22 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Position Sensor on a Volvo S60
How to Replace the Gear Position Sensor on a Volvo S60
Volvo S60 (2000-2009 / MK 1) Discover the main steps to remove and replace the gear position sensor or transmission sensor on the Volvo S60 in this guide. First, open the hood an…
How to Replace the Climate Control Switches on a Volvo S60?
How to Replace the Climate Control Switches on a Volvo S60?
Volvo S60 (2010-2018 / MK 2) To replace the climate control switches on the Volvo S60, you need to pry with an object to remove the trim located on the center console around the …
How to Set the Time in a Volvo S60?
How to Set the Time in a Volvo S60?
Volvo S60 (2010-2018 / MK 2) In this tutorial, you will learn how to set the time in a Volvo S60. This operation is extremely simple and quick, for example, after disconnecting t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos