Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Volvo XC60?

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part:

The reset of the tire pressure warning light for the Volvo XC60 can be performed by first inflating the tires until they reach the correct pressure value: this value will be indicated on the sticker that is affixed inside the driver's door pillar. Once the tires have been inflated, the instrument cluster must be activated, and the menu displayed on the central screen should be navigated to select the "Vehicle status" option and then "TPMS." This way, all sensors will read the new pressure values, and if they are correct, the warning light will disappear.

Posted on 26 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Light on a Volvo XC60?
How to Reset the Tire Pressure Light on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To reset the tire pressure light on a Volvo XC60, first inflate the tires to the correct pressure: this value is found on the sticker inside the driv…
How to Reset the TPMS Warning Light on a Volvo XC60
How to Reset the TPMS Warning Light on a Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Today, we will go over the instructions to reset the Tire Pressure Monitoring System (TPMS) light on a Volvo XC60. Before recalibrating the TPMS sens…
How to Reset the Tire Pressure Light on a Volvo XC60?
How to Reset the Tire Pressure Light on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) You can completely eliminate the tire pressure light from the instrument cluster of the Volvo XC60 by inflating the tires to the recommended pressure…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos