Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console of the Volvo V50

Model: Volvo V50 MK 1 - Years 2004-2012

In this brief guide, we will see the instructions that will allow us to remove and replace the plastic cover of the centre console of the Volvo V50. First, get inside the cabin and start by removing the standard radio, disconnecting the wiring found at the back; then remove the plastic cover of the centre console by prying at the sides and disconnecting the wiring of the buttons, as shown in the video. At this point, carry out the repair or replacement of the cover or controls of the console, applying the reverse procedure for reassembly!

Posted on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time in the Volvo V50?
How to adjust the time in the Volvo V50?
Volvo V50 (2004-2012 / MK 1) In this tutorial we can see how to adjust the time in the Volvo V50, an extremely simple and quick operation, to be carried out for example after the…
How to Remove the Centre Trim Panel on Volvo V50
How to Remove the Centre Trim Panel on Volvo V50
Volvo V50 (2004-2012 / MK 1) Learn how to remove the centre trim panel on a Volvo V50. Position the gear knob vertically, then use a plastic lever to pry off the trim (the gaiter…
How to disassemble the rear door panel in the Volvo V50?
How to disassemble the rear door panel in the Volvo V50?
Volvo V50 (2004-2012 / MK 1) Disassembling the rear door panel in the Volvo V50, as we can see in this tutorial, is an extremely simple and quick operation. First of all, make su…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos