Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Volvo C30

Model: Volvo C30 MK 1 - Years 2006-2013
Part: Door trim panel

Removing the front driver’s side door panel on a Volvo C30 is done in the same way for the S40 and V50 models; start by removing the inner cover of the central handle of the panel, then unclip and remove the entire control panel for the electric window lifts; within the control panel housing, there are two screws that secure the panel to the door body; at this point, pry along the entire edge of the panel to unclip the pressure clips, also removing the plastic cover located near the external rear-view mirror.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove a Door Panel on Volvo C30
How to Remove a Door Panel on Volvo C30
Volvo C30 (2006-2013 / MK 1) How do you remove the door cover panel? Here’s how to remove the cover panel of the Volvo C30. Remove the internal handle with the window switch, the…
How to disassemble the air conditioning controls of the Volvo C30
How to disassemble the air conditioning controls of the Volvo C30
Volvo C30 (2006-2013 / MK 1) Below we will see the necessary instructions in order to disassemble and replace the air conditioner controls of the Volvo C30, in simple steps. Firs…
Replacement of the gear shift knob of the Volvo C30
Replacement of the gear shift knob of the Volvo C30
Volvo C30 (2006-2013 / MK 1) Today's information will show us the steps on how to disassemble and replace the gear shift knob of the Volvo C30. First, we get on board the vehicle…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos