Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Side Indicator Bulb

Model: Volvo S70 MK 1 - Years 1996-2000
Part: Side marker bulb

Open the front bonnet and ensure it is securely supported. Insert your fingers between the headlamp and the indicator, press the retaining tab of the indicator until it releases, and pull the side indicator forward from its housing. Disconnect the connector attached to the bulb holder, remove the bulb holder complete with bulb, and replace it (remove by pressing and twisting); reposition the bulb holder with the new bulb, reconnect the plug, and insert the indicator back into its housing, pressing until the retaining tab clicks into place.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb or Glass
How to Replace the Front Headlight Bulb or Glass
Volvo S70 (1996-2000 / MK 1) This tutorial shows how to replace the front headlight bulb of a Volvo S70. First, after opening the bonnet, unscrew the internal bolt that secures t…
Replacing the Rear Headlight Bulb
Replacing the Rear Headlight Bulb
Volvo S70 (1996-2000 / MK 1) Open the rear bonnet and ensure it is securely supported. Remove the carpet cover on the side trim panel: at this point, you can see the bulb holder …
Dismantling the Rear Seat
Volvo S70 (1996-2000 / MK 1) To dismantle the rear seat, or the backrest of the rear seat, first fully tilt the backrest forward. Next, remove the side cushion of the seat, which…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos