Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo S60?

Model: Volvo S60 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

You can clear the Service light from the instrument cluster of the Volvo S60 by turning on the ignition, ensuring that the T2 code and its numerical value are displayed on the cluster. Then, press the ignition button once without starting the engine, and simultaneously hold down the OK button on the right side of the steering wheel.

At the same time, keep the ignition button pressed, and continue holding both buttons until a flashing 'i' appears on the cluster; at this point, you can release the buttons only when an audible signal indicates that the reset is complete.


Posted on 24 September 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on Volvo S60
How to Reset the Maintenance Light on Volvo S60
Volvo S60 (2000-2009 / MK 1) Today we will discover the steps to reset the maintenance service light for the engine oil change on the Volvo S60. First, get into the vehicle and p…
How to Reset the Service Light on a Volvo S60
How to Reset the Service Light on a Volvo S60
Volvo S60 (2010-2018 / MK 2) In this guide, we will discover how to reset the service light for routine maintenance on the Volvo S60. First, get in the vehicle and start pressing…
How to Reset the Service Light on a Volvo S60
How to Reset the Service Light on a Volvo S60
Volvo S60 (2010-2018 / MK 2) Here are the instructions to reset the service light for routine maintenance on a Volvo S60. First, get in the vehicle and turn on the ignition to ac…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos