Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Hood Lift Supports

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Body

See other generations:
Video tutorial

To replace the lift supports, you need to remove the plastic covers near the mounting screws. For this operation, insert a screwdriver into the designated slot and pry carefully to avoid injury.

Support the hood or have someone help you, and forcefully remove the piston from the retaining pin. The piston is simply lodged in a hemisphere. Remove it from both sides.

Install the new piston by simply inserting both ends into the hemisphere. Reattach the clips and covers both underneath and on top. Test the perfect operation by closing the hood.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

How to Replace the Trunk Lift Supports
How to Replace the Trunk Lift Supports
Volvo Xc90 (2002-2014 / MK 1) Do you want to replace the lift supports for the trunk of the XC 90? This video will assist you with the operations. Open the vehicle's trunk, then u…
Replacement of the timing belt of the Volvo XC90
Replacement of the timing belt of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Today's instructions will allow us to disassemble and replace the timing belt of the Volvo XC90. First, we open the hood of the vehicle and start by …
Guide to Replacing the Timing Belt on the Volvo XC90 2.4D
Guide to Replacing the Timing Belt on the Volvo XC90 2.4D
Volvo Xc90 (2002-2014 / MK 1) Today's information will show the steps for replacing the timing belt on the Volvo XC90 2.4D. First, open the hood and remove the upper plastic cover…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos