Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on a Volvo XC70

Model: Volvo Xc70 MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Front bumper

See other generations:
Video tutorial

Removing the front bumper of the Volvo XC70? Here’s how to remove it from the top. First, remove the fog lights from above the bumper. Lift the bonnet and secure it, then raise the car on a jack; use a plastic or metal lever to remove the securing rivets located at the top of the bumper.

Once the rivets at the top are removed, take off the side plastic impact absorbers (if present on the version) and unscrew the screws located in the wheel arch liners (remove the pins located at the bottom of the bumper). Remove the bumper from the body of the vehicle by hand.

Fit a new bumper by reversing the assembly process.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel in the Volvo XC70?
How to Remove the Front Door Panel in the Volvo XC70?
Volvo Xc70 (2000-2007 / MK 2) To remove the front door panel in the Volvo XC70, start by removing the front part of the armrest, using a flat-head screwdriver or an equivalent too…
Replacing the Timing Belt on the Volvo XC70
Replacing the Timing Belt on the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) This guide will illustrate the main steps to dismantle and replace the timing belt on the Volvo XC70. First, open the bonnet and begin removing the e…
How to Replace the Cabin Fan Resistor on a Volvo XC70?
How to Replace the Cabin Fan Resistor on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) To replace the cabin fan resistor on a Volvo XC70, start by removing the side cover of the centre console located near the driver's footwell. Once th…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos