Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on a Volvo XC70?

Model: Volvo Xc70 MK 3 - Years 2007-2016
Part: Blower motor

To replace the cabin fan resistor on a Volvo XC70, start by removing the side cover of the centre console located near the driver's footwell. Once this cover is off, loosen the screws securing the accelerator pedal, allowing it to be removed from its position by disconnecting its connector. Just behind it, you will locate the fan resistor, which needs to be extracted and replaced with a new part; after replacement, install the new resistor.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do I move the radio of the Volvo XC70
How do I move the radio of the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) Removing the radio on a Volvo XC70 is a piece of cake, in fact, to carry out the replacement we need to use a flat-head screwdriver and a Torx key. W…
How to Replace the Battery on a Volvo XC70?
How to Replace the Battery on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) To replace the battery on a Volvo XC70, open the bonnet to access the components in the engine bay. Here, locate the battery at the top right of the …
Resetting the Service Light on the Volvo XC70 MK2
Resetting the Service Light on the Volvo XC70 MK2
Volvo Xc70 (2000-2007 / MK 2) The activation of the orange triangular light with an exclamation mark in the centre on the instrument panel of the Volvo XC70 warns you that you are…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos