Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V50
    4. : How to remove the front door panel on Volvo V50

Volvo V50 - Video tutorial

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Door panel
Operation: How to remove the front door panel on Volvo V50

In today's video tutorial we will see how to remove the front door panel on a Volvo V50, in simple and quick steps. First we open the front door and start by removing the push-button panel, levering the plastic of the grip handle and disconnecting the electrical connector of the buttons; then we go to unscrew all the screws that we find on the panel, using a torx wrench, as in the video. At this point we gently pry the sides of the panel to remove it; we just have to disconnect the cable of the opening handle that we find on the back last!


Posted on 23 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos