Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Tailgate and Remove the Handle on a Volvo V50

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Handle

In this video, you will find instructions on how to open the tailgate and replace the non-functioning mechanism on a Volvo V50, following the steps outlined below. First, open the boot lid and remove the screws near the handle using a screwdriver or T25 Torx key; then remove the entire handle along with the mechanism, as shown in the video. At this point, disconnect the electrical connector of the lock and replace it with the new part; follow the video to the end for reassembly!

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on a Volvo V50?
How to Remove the Rear Light on a Volvo V50?
Volvo V50 (2004-2012 / MK 1) To remove the rear light on a Volvo V50, open the tailgate of the boot and remove the side cover of the wall corresponding to the light. By removing …
How to Remove the Front Door Panel on a Volvo V50
How to Remove the Front Door Panel on a Volvo V50
Volvo V50 (2004-2012 / MK 1) In today's tutorial, you will learn how to remove the front door panel on a Volvo V50 in simple and quick steps. First, open the front door and start…
Removing the Door Panel on a Volvo V50
Removing the Door Panel on a Volvo V50
Volvo V50 (2004-2012 / MK 1) In this guide, learn how to remove the door panel on a Volvo V50. First, open the front door and use a plastic trim tool or something thin to remove …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos