Do it yourself
Frequently asked questions about cars and motorcycles

Removing Starter Motor on Volvo S60

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Starter motor

Today, you will see the main instructions on how to remove the starter motor from a Volvo S60. First, open and lift the hood and remove the air intake hose. Then, remove the tube located above the starter motor by loosening the clamp and unscrewing the fastening screw to access the starter motor. At this point, use a 7 mm wrench to unscrew the fastening bolts of the starter motor, and finally, disconnect the electrical connector. Now you can replace it with the new one!

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo S60 (2019-2026 / MK 3) The necessary procedure to successfully complete the manual reset of the maintenance light on your latest model Volvo S60 is very simple, and you can…
Volvo S60 (2010-2018 / MK 2) Following these brief steps, we will see the process of disassembling and replacing the central console of the Volvo S60. First, we get on board the …
Volvo S60 (2019-2026 / MK 3) To correctly complete the replacement of the cabin air filter in your Volvo S60 third generation (model year 2019), follow these simple steps outline…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos