Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V70
    4. : Remove the ignition motor on Volvo V70

Volvo V70 - Video tutorial

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Starter motor
Operation: Remove the ignition motor on Volvo V70

The car does not start? The starter motor is out of order and needs to be replaced. Let's see how to remove the motor from inside the engine compartment. We raise the front hood, disassemble the ventilation pipe, then, disconnect the battery power terminals. After arriving at the ignition motor we can disconnect the electrical terminals, unscrew the locking pins of the starter motor with a socket wrench and remove it from inside the engine compartment. We assemble the new ignition motor with the power supply cables and with the attached tightening screws. We assemble the aeration pipes disassembled earlier.


Posted on 23 December 2023 by ScegliAuto



How to remove the starter motor of a Volvo V70
Volvo V70 (2000-2007 / MK 2) Let's see how to remove the starter motor of a Volvo V70. We lift the bonnet and put it in safety; we remove the aeration kit, disconnect the termina
How to reset the "Service" light on a Volvo V70?
Volvo V70 (2000-2007 / MK 2) Good morning! Today we will focus on resetting the "Service" light on our Volvo V70. Before we begin, it is essential to have performed the recommend
Where is the fuse box located in the Volvo V70 2001?
Volvo V70 (2000-2007 / MK 2) If you want to discover where all the fuses of your second generation Volvo V70 (year 2001) are located, you simply need to read the instructions in

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos