Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Maintenance of the Bonnet Latch Mechanism

Model: Volvo V70 MK 1 - Years: 1996, 1997, 1998, 1999, 2000
Part: Body

See other generations:
Video tutorial

This video addresses a problem with the bonnet latch mechanism of a Volvo V70 that does not close properly. The latch mechanism appears dirty and lacks lubrication.

Two cables connected to it are part of the alarm system. The video demonstrates the operation of the latch system by simulating it with a screwdriver tip. It also shows the mechanism's operation by pressing the bonnet release button located in the cabin.

At this point, clean every crevice of the mechanism with a cloth. Before disassembly, mark the correct installation position with whiteout.

The part is then removed for easier maintenance, cleaning, and lubrication. Simply unscrew two 10 mm bolts.

Once removed, give the mechanism another clean, then proceed to grease it (in this case, door hinge lubricant is used). Lubricate both parts of the latch system (the mechanism and the hook located at the top and inside of the bonnet).

Now reposition and mount the mechanism, which will finally operate correctly!


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Boot Gas Struts on a Volvo V70
Replacing the Rear Boot Gas Struts on a Volvo V70
Volvo V70 (2000-2007 / MK 2) Today, you will see how to disassemble and replace the gas struts of the rear boot on a Volvo V70 in simple steps. First, open the boot lid and use a…
Replacement and Maintenance of the Car Radio
Replacement and Maintenance of the Car Radio
Volvo V70 (1996-2000 / MK 1) This is a simple and quick task that you can perform without using special tools or equipment, just your key. Simply press with your flat key to extr…
How to Remove the Rear Lights on a Volvo V70?
How to Remove the Rear Lights on a Volvo V70?
Volvo V70 (2000-2007 / MK 2) In this tutorial, you will see how to replace the rear lights on a Volvo V70, a very simple operation. First, ensure that the key is not inserted to …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos