Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform a Service Reset on a Volvo XC90

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Warning light – error code

To perform a service reset on a Volvo XC90, press the button that slightly protrudes from the glass cover of the dashboard, where daily mileage can be added. Hold the button and turn on the ignition, continue pressing the button until the orange triangle warning light appears on the dashboard. Turn off the vehicle and turn it back on. Now, for the service reset, press the button again while simultaneously holding the ignition switch until the triangle starts to flash. Now release the ignition and turn it off.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo Xc90 (2015-2026 / MK 2) After performing the maintenance service, it is necessary to reset the service light for the engine oil change; let's see the reset procedure on the …
Volvo Xc90 (2015-2026 / MK 2) In today's video, learn how to reset the service light on a Volvo XC90. This tutorial also applies to other models from the Swedish manufacturer equi…
Volvo Xc90 (2015-2026 / MK 2) In this tutorial, you will see how to reset the service light on a Volvo XC90, a very simple and quick operation to perform only after completing all…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos