Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2010 and 2011 Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Service warning light

Learn how to reset the service light on a 2010 Volvo XC60 independently without using professional tools or needing a mechanic. Insert the key and turn on the ignition while keeping the engine off. Now press (and hold) the T1/T2 button located at the bottom right of the instrument cluster, below the engine RPM gauge, and simultaneously press the "start" button, the same one used to turn on the ignition. Release the start button, and when the yellow "i" on the display stops flashing, release the T1/T2 button as well. Turn off the ignition and wait at least three minutes before turning it back on to check the outcome of the procedure.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Volvo XC60?
How to Reset the "Service" Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) Hello, today's guide aims to reset the "Service" light on your Volvo XC60. Before starting, ensure you have performed the recommended maintenance. Be…
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, turn on the ignition and then connect a diagnostic tool to the vehicle's OBD port. This port is located o…
How to Reset the Service Light on the Volvo XC60?
How to Reset the Service Light on the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on the Volvo XC60, insert the key into the ignition switch and turn it to position 1, which only powers the instrument clu…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos