Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Stabilizer Bar on the Volvo XC90

Model: Volvo Xc90 MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

See other generations:
Video tutorial

In this video, you will learn how to replace the rear stabilizer bar on the Volvo XC90. Raise the vehicle on a lift for comfortable access. Then, using an 18 mm wrench and a T40 Torx screwdriver, proceed to remove the two nuts that secure the rear stabilizer bar. Slide the bar out of its mount and take the new one. Make sure to insert the two threads into the correct holes and the bar in the correct orientation.

Once it is in place, tighten the nuts again and ensure that the bar is securely mounted. This is a simple operation that will take a maximum of half an hour.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to disassemble the rear light of the Volvo XC90
How to disassemble the rear light of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Today's instructions will show us how to disassemble and replace the rear light and its bulbs on the Volvo XC90. First, let's open the rear hatch of …
How to Replace the Remote Battery for the Volvo XC90?
How to Replace the Remote Battery for the Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) To replace the battery in the Volvo XC90 remote, lower the side lever to remove the cover on the back of the device. Next, pry off the front cover an…
How to Remove the Headrest from a Volvo XC90?
How to Remove the Headrest from a Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) To remove the headrest from a Volvo XC90, press the button located at the base of the backrest on the rear of the seat. While holding the button, pul…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos