Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volvo
  4. :
  5. Xc90
  6. : How do you replace the battery of the Volvo XC90 remote control?

Volvo Xc90 - Video tutorial

Model: Volvo Xc90 MK 2 - Years 2015-2024
Part: Key
Operation: How do you replace the battery of the Volvo XC90 remote control?

In order to replace the battery of the Volvo XC90 remote control, you need to lower the side lever so that the cover on the back of the device can be removed; then you will need to lever off the front cover and the circular cover underneath. The battery located below this cover can then be removed and replaced with a new one. After removing the old battery, you can close the remote control again by inserting the appropriate covers, and finally, you can check that the device functions correctly.


Posted on 12 January 2024 by ScegliAuto



How to change the battery in the remote control key of the Volvo XC90
Volvo Xc90 (2015-2024 / MK 2) We will see below the necessary procedure on how to disassemble and replace the remote control battery of the Volvo XC90 key. First we take our remot
Volvo XC90 key battery replacement
Volvo Xc90 (2015-2024 / MK 2) To replace the remote control battery of your Volvo XC90 you must first unhook the remote control cover without the Volvo logo by pressing the unlock
How do i replace the remote control battery of the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To replace the battery of the Volvo XC90 remote control, simply remove the plastic cover located on the back of the remote control, opposite the butt

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos