Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo XC60?

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Service warning light

To reset the service light on a Volvo XC60, follow these steps: 1) Insert the key into the ignition; 2) Press the start/stop button once to turn on the instrument cluster; 3) Press and hold the OK button located at the end of the lever on the left side of the steering wheel; 4) Also hold the start/stop button until all the warning lights on the dashboard illuminate; 5) Release the start/stop button; 6) When the light with an 'I' inside a yellow square starts to blink, release the OK button as well. At this point, an audible signal indicates that the light has been reset.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo XC60
How to Reset the Service Light on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Here is the procedure to reset the service light for routine maintenance on the Volvo XC60. First, get inside the cabin and turn on the ignition whil…
Resetting the service light on the Volvo XC60.
Volvo Xc60 (2008-2016 / MK 1) Below we will see the procedure for resetting the service maintenance light for the oil change on the Volvo XC60, in simple and quick steps. First, w…
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) Resetting the service light on a Volvo XC60, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, make sure you …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos