Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Xenon Bulbs in the Volvo XC60?

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Headlight bulb

In this tutorial, you will see how to replace the Xenon bulbs in the Volvo XC60, a very simple and quick operation. Before proceeding, ensure the key is not in the ignition for safety. Start by opening the hood, then remove the two metal brackets located on the top edge of the headlight and separate the headlight from the body. Next, disconnect the power connector using a flathead screwdriver, open the large rear cap, and unlock the various retaining clips. Finally, extract the bulb by turning it counterclockwise, insert the replacement, and reassemble everything by following the reverse procedure.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Begin by opening the trunk of your Volvo XC60. Next, remove the cover located on the left inner side of the cargo area. Then, disconnect all the elec…
How to replace the rear headlight bulbs in the Volvo XC60?
How to replace the rear headlight bulbs in the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In this tutorial, we can see how to replace the rear headlight bulbs in the Volvo XC60, a very simple and quick operation. First of all, let's make s…
How to Remove the Rear Headlight of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos