Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volvo V40

Model: Volvo V40 MK 1 - Years 1995-2012
Part: Service warning light

Below, you will see the procedure necessary to reset the service light for the routine maintenance of the oil change on the Volvo V40. First, get inside the vehicle and press and hold the button located on the left of the instrument panel; then turn on the ignition and keep the button pressed until the service light resets completely from the instrument panel display, as illustrated in the video. At this point, turn off the ignition again and start the engine, ensuring that the engine oil light has reset!

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn the ignition on by rotating the key. Then, press and hold the OK button located at the end of the l…
How to Reset the Service Light on the Volvo V40?
How to Reset the Service Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn on the instrument panel by rotating the key in the ignition switch, then press and hold the OK butt…
How to Reset the Service Light on a Volvo V40?
How to Reset the Service Light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on a Volvo V40, turn the ignition key to switch on the instrument panel. Then, press and hold the OK button located at the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos