Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Light Bulbs in the Volvo S40

Model: Volvo S40 MK 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Interior dome light bulb

See other generations:
Video tutorial

Here are the instructions that will allow you to remove and replace the bulbs in the interior light of the Volvo S40. First, get inside the vehicle and unclip and remove the light from the roof, using something thin to pry it from the sides. Then, remove the small bulb from the electronic circuit, replacing it with a new one (with the same fitting), as shown in the video.

At this point, replace the other bulbs in the rear light in the same manner, following the video tutorial to the end!


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Replacement of Interior Light Bulb
Replacement of Interior Light Bulb
Volvo S40 (2004-2012 / MK 2) Choose a new replacement bulb identical to the one being replaced. In this case, a LED bulb is installed in the interior light instead of the old tub…
Replacing the Cabin Light Bulb
Replacing the Cabin Light Bulb
Volvo S40 (1995-2004 / MK 1) To replace the bulb in the cabin light, you only need to remove the transparent outer cover: simply lever it off sideways with a small flat screwdriv…
Replacing the Cabin Light Bulb
Replacing the Cabin Light Bulb
Volvo S40 (1995-2004 / MK 1) In every car, there is a light known as the courtesy light. Usually, this is located at the front of the cabin ceiling, halfway between the passenger…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos