Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Light Bulb

Model: Volvo S40 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Interior dome light bulb

See other generations:
Video tutorial

To replace the bulb in the cabin light, you only need to remove the transparent outer cover: simply lever it off sideways with a small flat screwdriver. Once the cover is removed, pull the old bulb outwards (T5 base); then insert the new bulb, ensuring it works correctly to rule out other issues with the system (such as blown fuses or oxidised electrical contacts), and reapply the cover, ensuring it is correctly seated as it also acts as a switch for turning the light on and off.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Light Bulb
Replacing the Cabin Light Bulb
Volvo S40 (1995-2004 / MK 1) In every car, there is a light known as the courtesy light. Usually, this is located at the front of the cabin ceiling, halfway between the passenger…
Replacing the Rear Light Bulb
Replacing the Rear Light Bulb
Volvo S40 (1995-2004 / MK 1) A blown bulb can result in a fine, so it is advisable to replace it immediately. To replace the rear light bulb, simply open the access flap located …
Replacing the Kick Plate Light Bulb
Replacing the Kick Plate Light Bulb
Volvo S40 (1995-2004 / MK 1) Near the driver's footwell, there is a bulb that illuminates the footwell area: to replace this bulb, detach the transparent plastic lens that also s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos