Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Interior Light Bulb

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Interior dome light bulb

Choose a new replacement bulb identical to the one being replaced. In this case, a LED bulb is installed in the interior light instead of the old tubular bulbs; however, both types are perfectly interchangeable without issues. Remove the cover of the interior light to access the bulb holder, remove the faulty bulb, and refit the new bulb. For LED bulbs, it is important to install them with the correct polarity. If the new bulb does not light up, rotate it 180 degrees and reinstall it. Close the interior light with its cover. The same operation can also be performed on other interior lights.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Interior Light Bulbs in the Volvo S40
Replacing the Interior Light Bulbs in the Volvo S40
Volvo S40 (2004-2012 / MK 2) Here are the instructions that will allow you to remove and replace the bulbs in the interior light of the Volvo S40. First, get inside the vehicle a…
Replacing the Cabin Light Bulb
Replacing the Cabin Light Bulb
Volvo S40 (1995-2004 / MK 1) In every car, there is a light known as the courtesy light. Usually, this is located at the front of the cabin ceiling, halfway between the passenger…
Dismantling, Testing and Replacing the Light Switch
Dismantling, Testing and Replacing the Light Switch
Volvo S40 (1995-2004 / MK 1) Sometimes, bulbs stop working, but after replacement, they still do not light up. When this happens, it is natural for those less experienced to thin…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos