Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc70
    4. : Resetting the service light on the Volvo XC70.

Volvo Xc70 - Video tutorial

Model: Volvo Xc70 MK 2 - Years 2000-2007
Part: Checks and maintenance
Operation: Resetting the service light on the Volvo XC70.

Given the importance of periodically carrying out maintenance checks, a control system alerts us in advance with a warning on the dashboard of the Volvo XC70. Once the necessary operations have been performed, we must proceed with the system reset. We sit in the driver's seat, close all the doors, turn the ignition key to position 1, press and hold the button located at the bottom right of the odometer, and then turn the key to position 2. As soon as the maintenance indicator starts flashing, we release the button, and an audible signal will notify us of the reset.


Posted on 26 September 2023 by ScegliAuto



How do you reset the Service light on the Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) The operation of resetting the Service light on the Volvo XC70 is done by holding down the button located on the right side of the instrument panel.
To reset the service light on the Volvo XC70.
Volvo Xc70 (2007-2016 / MK 3) Today's guide will show us the procedure for resetting the service light for regular oil change maintenance on the Volvo XC70. First, we get into the
How do you reset the Service light on the Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) On the Volvo XC70, the procedure to reset the Service light is done by holding down the button located on the right side of the instrument panel. Whi

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos