Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Gear Knob on the Volvo C30

Model: Volvo C30 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Shift knob

Video tutorial

Here are the main instructions to remove and replace the gear knob on the Volvo C30, following these simple steps. First, get in the vehicle and put the gearbox in neutral; then, forcefully rotate counterclockwise a quarter turn to detach it from the lever, as shown in the video.

At this point, separate the gear knob from the gaiter, replacing it with the new one; if necessary, also replace the gaiter and secure the new knob to it, remounting everything onto the gear lever!


Updated on 20 August 2026 by ScegliAuto


Related tutorials

Replacement of the gear shift knob of the Volvo C30
Replacement of the gear shift knob of the Volvo C30
Volvo C30 (2006-2013 / MK 1) Today's information will show us the steps on how to disassemble and replace the gear shift knob of the Volvo C30. First, we get on board the vehicle…
How to Remove the Centre Console of the Volvo C30?
How to Remove the Centre Console of the Volvo C30?
Volvo C30 (2006-2013 / MK 1) To remove the centre console of the Volvo C30, use a tool to pry off the trim that surrounds the entire centre panel and the gear lever. Next, using …
How to Remove the Gear Knob on Volvo C30 S40 V50 C70
How to Remove the Gear Knob on Volvo C30 S40 V50 C70
Volvo C30 (2006-2013 / MK 1) In this video tutorial, learn how to remove and replace the gear knob on various Volvo models, including the C30, S40, V50, and C70 (manual gear knob…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos