Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the serpentine belt on the Volvo S60?

Model: Volvo S60 MK 2 - Years 2010-2018
Part: V-belt

To replace the serpentine belt on the Volvo S60, lift the car with a jack or a lift so you can loosen the bolts securing the front right wheel. Once the wheel is removed from its housing, you can locate the serpentine belt at the back. After removing the old belt, install the new one around the respective pulleys and then tension it. Once the installation is complete, check that everything functions correctly.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Timing Belt Replacement for Volvo S60 2.0L
Timing Belt Replacement for Volvo S60 2.0L
Volvo S60 (2010-2018 / MK 2) Today, let's go over the main instructions on how to remove and replace the timing belt on the Volvo S60 with a 2.0L engine. In this case, the timing…
Guide to replacing the timing belt of the Volvo S60
Guide to replacing the timing belt of the Volvo S60
Volvo S60 (2000-2009 / MK 1) In this guide we will see the main information that will allow us to disassemble and replace the timing belt of the Volvo S60. First, we open the hoo…
How to Replace the Timing Belt on the Volvo S60?
How to Replace the Timing Belt on the Volvo S60?
Volvo S60 (2010-2018 / MK 2) To replace the timing belt on the Volvo S60, you need to remove the engine block from its housing to access the left side of the engine block: here y…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos