Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volvo
  4. :
  5. S40
  6. : Resetting maintenance on Volvo S40

Volvo S40 - Video tutorial

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Checks and maintenance
Operation: Resetting maintenance on Volvo S40

Through this very short video guide today, we will see the operation necessary to reset the maintenance light on a Volvo S40, second generation model produced from 2004 onwards. Let's start the procedure by pressing and holding the left button on the speedometer and then turning on the vehicle's ignition without starting the engine. After doing this, we will see the yellow "i" light start flashing, so we continue to hold down the left button until this light has flashed five times as shown in the video to complete the job.


Posted on 1 March 2024 by ScegliAuto

    Frequently Asked Questions

    • S40 1995-2004 - Why does the Volvo S40 not start? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos