Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Volvo S40

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Service warning light

Today's guide will explain the necessary steps to reset the maintenance service light for the oil change on the Volvo S40. First, get into the car and start by pressing and holding the left button on the instrument panel; then turn on the ignition and wait for the service light to flash until it becomes steady, as shown in the video. Next, turn off the instrument panel again, then start the engine; verify that the service light has been reset on the instrument panel!

Posted on 13 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo S40
How to Reset the Service Light on a Volvo S40
Volvo S40 (2004-2012 / MK 2) If you are wondering how to manually reset the service light on your Volvo S40 Mk2, you are in the right place because below you will find all the ne…
Service Reset on a Volvo S40
Service Reset on a Volvo S40
Volvo S40 (1995-2004 / MK 1) In today's tutorial video, you will learn the complete procedure to reset the service light on a first-generation Volvo S40, produced from 1998 to 20…
How to Reset the Service Light on the Volvo S40?
How to Reset the Service Light on the Volvo S40?
Volvo S40 (2004-2012 / MK 2) .. In this tutorial, we will see how to reset the service light on the Volvo S40, a very simple and quick operation to be carried out.. …

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos