Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Fob Battery of a Volvo XC60

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Key

See other generations:
Video tutorial

In this video, see how to change the battery of the remote for a Volvo XC60 (as well as many other models from the Swedish manufacturer): first, extract the physical emergency key located at the keyring. By using a small screwdriver to push the release button, you can remove the key. Once this is done, leverage the slot left by the key to open the upper housing of the remote.

This will allow you to remove the battery (a CR2430) which you will place in its compartment, paying attention to the polarity. Close the housing, put the physical key back in place, and the job is done.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Change the Battery in a Volvo XC60 Key Fob
How to Change the Battery in a Volvo XC60 Key Fob
Volvo Xc60 (2008-2016 / MK 1) How to change the battery in a Volvo XC60 key fob? Let's see how to disassemble it. Take your ignition key and use a screwdriver to pry between the t…
How to Replace the Key Fob Battery on a Volvo XC60?
How to Replace the Key Fob Battery on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To replace the battery in the key fob for the Volvo XC60, use a tool to pry open the front and back covers of the key fob shell. Once these covers ar…
How to Replace the Key Fob Battery in a Volvo XC60?
How to Replace the Key Fob Battery in a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) In this tutorial, you will see how to replace the key fob battery in a Volvo XC60, a very simple and quick operation. For this, you will need a small…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos