How to Repair the Wiring of the Rear Bonnet on Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Body

This video is currently unavailable

If the heated rear window does not work or the rear wiper operates intermittently, there is likely a problem with the wiring harness that passes from the headlining into the rear tailgate through the corrugated rubber grommet near the upper hinges of the tailgate.

The continuous opening and closing of the bonnet tend to sever the wires passing through this grommet.

Therefore, you will need to remove all the trims of the tailgate to access the wiring, pulling it out from the grommets to perform soldering. It is advisable to add a piece of wire at each break to extend the wires, protecting everything with heat-shrink tubing and then wrapping it all with tape.

Updated on 27 February 2026 by ScegliAuto

Other guides you may be interested in

Rear Window - Maintenance and repair on other vehicles

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

How to Repair the Wiring of the Rear Bonnet on Giulietta

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos