Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : Remove the passenger compartment ventilation fan on Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Interior blower
Operation: Remove the passenger compartment ventilation fan on Alfa Romeo 147

Remove the passenger compartment ventilation fan on Alfa Romeo 147. Remove the cloth covering under the glove compartment with a plastic lever. The passenger compartment ventilation fan is located exactly under the dashboard: unscrew the tightening screws on the fan cap with a screwdriver. Once this has been done, let's pull off the cap with the fan after disconnecting the power cables. We carry out the necessary cleaning of the fan (we disassemble the fan and its parts). Finally we reassemble the previously disassembled fan and all its components under the glove box. We check the voltage regulator and its correct functioning, removing it from the compartment next to the fan. Finally, we test the correct functioning.


Posted on 12 October 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • 147 2000-2010 - Why doesn't the Alfa Romeo 147's heating fan work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos