Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment from the Centre Tunnel of an Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Center console tunnel

Video tutorial

Watch this video to learn how to remove the glove compartment from the centre tunnel of an Alfa Romeo Mito. Use a plastic lever to pry off the trim located at the bottom of the centre tunnel. After removing the plastic trim, unscrew the securing bolts on the sides of the centre tunnel using a socket wrench.

Once this is done, pull the tunnel away and disconnect any power cables. Finally, insert the new piece into the centre tunnel, reassemble all components of the glove compartment as you disassembled them earlier.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Compartment of an Alfa Romeo Mito
How to Remove the Glove Compartment of an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video, we will see how to remove the glove compartment of an Alfa Romeo Mito. Open the glove compartment and unclip the end stop arms, then u…
How to Remove the Cabin Ventilation Fan on an Alfa Romeo Mito
How to Remove the Cabin Ventilation Fan on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video, see how to remove the cabin ventilation fan on an Alfa Romeo Mito. Use a plastic lever to remove the plastic cover of the right centra…
How to Remove and Replace the Gear Gaiter on an Alfa Romeo Mito
How to Remove and Replace the Gear Gaiter on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Do you want to remove and replace the gear gaiter on your Alfa Romeo Mito? Here's how to proceed: detach the gaiter frame from the plastic covering o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos