Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the tail light bulbs in an Alfa Romeo GT?

Model: Alfa Romeo Alfa Romeo Gt MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

Video tutorial

In this tutorial, we will see how to replace the rear light bulbs in the Alfa Romeo GT, a very simple and quick operation. First of all, let's make sure that the key is not in the ignition, in order to operate safely.

Then, we open both the trunk lid and the access panel located at the back of the light in question. Next, we remove the inner wall of the compartment, grasp the bulb holder, and pull it out of the housing by turning it slightly counterclockwise.

At this point, all that remains is to replace the bulb and reassemble everything by following the reverse procedure.


Posted on 13 December 2025 by ScegliAuto


Related tutorials

Replacing the Front Lights on an Alfa Romeo GT
Replacing the Front Lights on an Alfa Romeo GT
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) Want to replace the front bulbs on an Alfa Romeo GT? Let's see how to remove the headlight bulbs. Lift the bonnet, locate the rear of the front headl…
How to Remove the Rear Lights on an Alfa Romeo GT?
How to Remove the Rear Lights on an Alfa Romeo GT?
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) In this tutorial, see how to remove the rear lights on an Alfa Romeo GT, a very simple and quick operation. First, ensure the key is not inserted for…
How to Adjust the Headlight Height on an Alfa Romeo GT
How to Adjust the Headlight Height on an Alfa Romeo GT
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) Below are the instructions that will allow you to adjust the height of the front headlights on an Alfa Romeo GT. First, position yourself in front of…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos