Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Fuel Filter on Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Diesel fuel filter

In this video tutorial, you will learn how to change the fuel filter on the Alfa Romeo 147. First, lift the bonnet and disconnect the fuel lines from the filter. Then, disconnect the two connectors on the right side and the water sensor at the bottom of the filter. Unscrew the support nuts of the filter with a 13 mm spanner and extract it. Now, refit the new fuel filter in position. Remember to check the integrity of the fuel lines: if they are damaged or show signs of wear, replace them to avoid being stranded.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Fuel Pump of the Alfa Romeo 147
How to Change the Fuel Pump of the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) This guide will show you how to remove and replace the fuel pump or the fuel sender of the Alfa Romeo 147, following the instructions below. First, r…
How to Remove the Front Bumper from an Alfa Romeo 147
How to Remove the Front Bumper from an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, open the bonnet of your Alfa Romeo 147. Begin by unscrewing and removing all screws and bolts that secure the front bumper to the ch…
How to Replace the Diesel Filter on Alfa Romeo 147
How to Replace the Diesel Filter on Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) To maintain your car, let's look at replacing the diesel filter on an Alfa Romeo 147. Open the engine bonnet and locate the diesel filter. Use a sock…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos