Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Air Vents from an Alfa Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air vents

Video tutorial

Remove the air vents above the central dashboard of the Alfa Mito, let's see how to do it. Remove the radio from inside the central dashboard, take off the plastic trim above the dashboard. Unscrew the securing screws located under the vent grille.

Extract the plastic vent grille positioned above the central dashboard of the car. Pull out the air vents located at the top of the dashboard. Clean the air duct properly.

Install the new or refurbished parts as you removed the old ones. Refit all the covering pieces.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Vents on the Alfa Romeo Mito
How to Replace the Air Vents on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) This guide outlines the main steps to remove and replace the air vents on the Alfa Romeo Mito. First, get inside the vehicle and pull firmly on the c…
How to Remove the Air Vents of an Alfa Romeo Mito
How to Remove the Air Vents of an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Do the air vents in your car emit a bad smell and little air? In this video, see how to remove the air vents of an Alfa Romeo Mito located at the top…
Remove and Replace the Air Filter of the Alfa Romeo Mito
Remove and Replace the Air Filter of the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today, in this video tutorial, you will see how to remove and replace the air filter and its housing of the Alfa Romeo Mito, following the instructio…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos